Home » Workholding » Orange Vises » 6 Inch Vises » OV-100-106A
MariTool's product quality is guaranteed to meet or exceed your expectations.
We ship worldwide
Same day shipping via UPS is available for in-stock items ordered Monday through Friday before 4:00pm CDT (excluding holidays and USPS orders).
Click here for details
MariTool Payment Options
6" x 16" Dual Station Orange Vise GEN4 $2,199.95
6" x 16" Dual Station Orange Vise GEN4
Click to enlarge


6" x 16" Dual Station Orange Vise GEN4
Click to enlarge
Item No. OV-100-106A
Price: $2,199.95
Shipping: In Stock - Ships Same Day *
Quantity: 

* Same Day Shipping is only available on orders placed Monday - Friday before 4 P.M. Central Time.

Product Info

View complete catalog page

Fourth-generation vise with quick-change dovetailed jaw interface as standard equipment. Compatible with dovetailed quick-change jaws as well as 1/2"-13 bolt-on jaws in a 3.875" x 0.9375" bolt hole pattern. Can be converted to single-station configuration without any extra hardware.

Materials:

  • Master sliding jaws and carriers are made of Dura-Bar® cast iron (black oxided). Vise bodies and master center jaws are also made of Dura-Bar cast iron. Hardened bolt-on jaws and narrow center jaws are made of steel.
Performance:
  • Clamping force ratio: 600 lbs per 10-ft lbs torque Max recommended clamping force: 7200 lbs (120 ft lbs torque) Linearly consistent force-to-torque across the entire range, highly repeatable over time.
What's Included:
  • Two (2) sliding jaws, reversible for bolt-on and dovetail jaw interfaces
  • One (1) center jaw with dovetail jaw interfaces
  • One (1) hardened narrow center jaw
  • Two (2) hardened bolt-on jaw plates
  • Six (6) edge clamps (T-slot nuts and 1/2" or M12 hardware not included)
  • Four (4) dowel pins, 0.4993" OD x 1.0" length
  • Assorted cap screws
*Ball couplers and receivers sold separately.

Is a vise handle included?
The short answer is no. The sealed design of our carrier slide assembly makes it so that the main screw floats axially as the jaws open and close. The changing position of the screw's hex-end means that a typical vise handle won't work without extensions. Instead, we recommend using a standard 1/2" ratchet handle with a 6-point, 3/4" socket, and appropriate extensions as necessary. For precision work, we recommend using a torque wrench for repeatable clamping and a breaker bar for unclamping. The maximum torque that can be applied to the vise screw is 120 lb-ft. Rapid repositioning of the jaws can be done with an 18-volt cordless impact driver (40 lb-ft maximum). Unlike other vises on the market with thrust bearings that are susceptible to brinnelling, our vises are bearing-free and thus able to withstand impact forces without any detrimental effects.